Nikon AW100 - Manual (Page 118)

94
Ge
ne
ral C
amer
a S
e
tup
General Camera Setup
The Setup Menu
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Press the d button M z (setup) tab (A11)
Option Description A
Welcome screen
Select the image displayed as the welcome screen
when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to
use a picture taken with the camera as the welcome
screen. The default setting is None.
E66
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is selected, the camera automatically
calculates the time difference between the travel
destination and the w home time zone, and saves
images using the date and time of the travel
destination.
E67
Monitor settings
In Photo info, select the kind of information that is
displayed on the monitor during shooting mode and
playback mode. If you select Framing grid+auto info,
a framing grid is displayed when shooting to help you
frame the picture. Also, set the image review display
after shooting and the screen brightness.
E70
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
• When the scene mode is set to Sports, Museum,
Backlighting with HDR set to On, Panorama, Pet
portrait with Continuous, or when recording
movies, date cannot be imprinted.
E72
Vibration reduction
Reduce blurring caused by camera shake when
shooting. The default setting is On.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
E73
Set up
Welcome screen
AF assist
Motion detection
Vibration reduction
Print date
Monitor settings
Time zone and date