Nikon AW100 - Manual (Page 119)

95
The Setup Menu
Ge
ne
ral C
amer
a S
e
tup
Motion detection
When the camera detects camera shake or subject
movement at the time of shooting, it automatically
increases ISO sensitivity and shutter speed to reduce
blurring. The default setting is Auto.
The r icon lights in green when the camera detects
camera shake and increases shutter speed.
• When using certain shooting modes or settings,
motion is not detected. In this case the r icon is not
displayed.
E74
AF assist
When set to Auto (default setting), the AF-assist
illuminator (
A31) lights when shooting in dark
surroundings to help the camera focus.
• The illuminator has a range of about 3.5 m (11 ft) at
the maximum wide-angle position and about 2.0 m
(6 ft 6 in.) at the maximum telephoto position.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area
or the scene mode that is selected.
E75
Digital zoom
When set to On (default setting), the digital zoom is
enabled if the zoom button
g (i) is pressed when
optical zoom is set at the maximum telephoto zoom
position (
A29).
• When using certain shooting modes or settings, the
digital zoom cannot be used simultaneously.
E75
Sound settings
Turn various camera sounds on and off. A beep will
sound in the default setting.
• When using certain shooting modes or settings, the
operation sound is disabled.
E76
Action control
response
Set the operation sensitivity of the action button. When
this option is set to High (default setting), the operation
is performed even if the camera shake movement is
small. When this option is set to Low, the operation is
performed if the camera shake movement is large.
• When viewing images with Quick playback of
action control or in full-frame playback mode,
operation response of selecting images is fixed.
E77
Auto off
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 5 min.
E77
Option Description A