A52)) – Nikon AW100 User Manual
Page 76
52
A (Auto) Mode
Sh
ooting Feat
ures
C
Features That Cannot Be Used Simultaneously
These features may not be used in combination with certain features (
A63).
White balance
Adjust colors in the image closer to the colors as they appear
to the eye. Although Auto (default setting) can be used
under most types of lighting, you can apply the white
balance setting suited to the sky conditions or light source to
achieve better results if default setting results are
unsatisfactory.
• When the white balance setting is other than Auto or
Flash, set the flash mode (
A54) to W (off).
Continuous
Select the mode used for taking a series of pictures from
Single, Continuous H, Continuous L, BSS (
Multi-shot 16. The default setting is Single (i.e., only one
picture is captured at a time).
When set to Continuous H, up to three pictures are shot at
a rate of about 7.1 frames per second while the shutter-
release button is pressed all the way (when image mode is
set to Q 4608×3456).
ISO sensitivity
Higher ISO sensitivity allows you to take pictures of darker
subjects. Additionally, even with subjects of similar
brightness, pictures can be taken with faster shutter speeds,
and blurring caused by camera shake and subject
movement can be reduced. When set to Auto (default
setting), the camera sets the ISO sensitivity automatically.
If ISO sensitivity has increased automatically when Auto is
selected, E (
A28) is displayed on the shooting screen.
AF area mode
Allow you to determine how the camera selects the focus
area for autofocus to Face priority (default setting), Auto,
Manual, Center or Subject tracking mode.
Autofocus mode
Single AF (default setting) to adjust the focus only when the
shutter-release button is pressed halfway or Full-time AF to
adjust the focus even when the shutter-release button is not
pressed halfway can be selected. You may hear the sound of
the camera focusing.
Option
Description
A