Firmware update ready to begin -8 – NEC MH160 User Manual
Page 30
3-8 Using the Admin Tabs
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Step 5
Verify that the information in the File ver window is the correct file to be
downloaded and then click the Update button. This file copies from the
location to the handset. The Read/Write indicators reflect the action as it
occurs.
While a firmware update is in progress, you may open other tabs and the
handset indicators shown on those tables will inform you of the status of
the update.
Step 6
(Conditional) Should an Error indication occur, retry the update after
ensuring that the handset is properly seated and that the USB cable is in
good condition and connected securely. Contact Customer Service if an
error persists. See
for contact information.
Figure 3-8 Firmware update ready to begin
Note that the firmware file path, file time, file version and handset
version shown in the above example screen are for illustration only.