NEC MH160 - Manual (Page 39)

Using the Settings Editor 4-5
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Upload/download and indicators
When the Read Handset and Write Handset buttons are clicked, they
initiate the transfer of configuration data from or to the handset in the
charger. The handset indicators change color to indicate the state of the
transfer. See “Indicators” on page 3-2 for indicator color significance.
Tab Options
A tab system organizes the options. See .
Tabs on the Settings Editor window
Each tab contains options from the Admin menu and/or the Config menu
(see Table 4-1 ). Admin menu options are password protected and
usually set by the system administrator. Config menu options are
available to the end user but are also offered here for initial
configuration of key settings. Specific options vary by protocol.
Table 4-1 Tab options on the Settings Editor window
Tab Contents-Admin Menu Contents-Config Menu
Phone config Extension # and User Name
Time Zone
Daylight Saving
Protected Speed dial
Speakerphone
Location Service
Keypad Autolock
Display Contrast
Hearing Aid
Startup Song
Predial
Active User Profile
Network config IP Addresses
SSID
Security
Regulatory Domain
Diagnostics
N/A
Push-to-talk Admin Enabled/Disabled
Priority Channel and Name
Allowed Channels
Name Channels
N/A
Push-to-talk User N/A PTT Audio Volume
PTT Tone Volume
Default Channel
Subscribed Channels