NETGEAR PS100 - Manual (Page 113)

NetGear Print Server Manual
104
Figure 8-7 NetWare RPrinter Tab Window
NetWare RPrinter Menu Tab Fields
Field Description
Print Server
Mode
Indicates if the print server is in NetWare PSERVER mode.
Remote Printer
Mode
When selected, the print server operates in RPRINTER mode. If this button is not selected, you will not
be able to modify the following RPRINTER parameters.
Novell Printer
Server for P1
Enter the name of the NetWare print server to service the PRINTER 1 port of the print server.
Novell Printer
Server for P2
Enter the name of the NetWare print server to service the PRINTER 2 port of the print server. If there is
no PRINTER 2 port on the print server, this selection is not available and is shadowed out.
Frame Type
Select the frame types used by your network (Ethernet 802.2, Ethernet 802.3, Ethernet SNAP, and
Ethernet II). By default, all four frame types are enabled.
AppleTalk Tab