NETGEAR PS100 - Manual (Page 121)

NetGear Print Server Manual
112
8-3 Menu Options
The NetGear Administration program contains a menu bar that provides a number of options including
Control, Printer, and Help, which are outlined in the following section.
Control Menu
Control is the first item on the top menu bar is for print server control. Click on the Control selection,
move the cursor down to select one of the menu selections and click again to carry out the intended
action, as described below.
• Device Information
• Select this option to pop up a scrolling window providing a status of the various parameters on the
print server that can be customized. This information includes the various NetBEUI and TCP/IP
parameters.
Device Information
• Reset Device
• Issues a soft reset to reboot the print server. This process allows newly modified print server
parameters to take effect.
• Restore Default Configuration
• Changes all print server parameters to their factory default values. If only partial restoration is
intended, use the tab options for the different protocols and choose "Set to Default" from that
particular screen. A confirmation dialog, like the example below, will be shown.