Chapter 2 installation, 1 preparing the site, 2 verifying package contents – NETGEAR PS100 User Manual
Page 17
NetGear Print Server Manual
8
Chapter 2 Installation
• This chapter describes the installation and setup of the NETGEAR PS100 series Printer Server.
2-1 Preparing the Site
Before you begin installing the print server, prepare the installation site. Make sure the operating
environment meets the physical requirements of the print server, as described below.
2-2 Verifying Package Contents
Your package should contain the following:
• PS100 series Printer Server
• DC Power adapter
• PS100 Series Print Server Resource CD
• PS100 Series Print Server Installation Guide
• Warranty & Owner Registration Card
• Customer Support Phone Card
Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing, or
damaged parts. Refer to "Customer Support" section for the location of customer support in your area.
Keep the carton, including the original packing materials. Use them to repack the print server if you
need to return it for repair.