NEC P520 - Manual (Page 15)

NEC Versa P520 Disassembly Manual Page 15
Fig. 22: Disconnecting the glide pad flat cable
4. Close the LCD cover (if you did not disassemble the LCD assembly) and turn the
system upside down in order to remove the following screws (10, 11, 13).
Fig. 23: Removing the bottom screws retaining the glide pad assembly
5. Put back the system in normal position and remove the glide pad assembly.
Fig. 24: Removing the glide pad assembly
6. On the other side of the glide pad assembly, remove the 4 screws (16) in order to
remove the glide pad module as shown in Fig 25.
(10)=M2.3x5
(11)=M2.3x7
(13)=M2.3x12