NEC P520 - Manual (Page 18)

NEC Versa P520 Disassembly Manual Page 18
Removing the Top Cover
1. Remove the LCD Assembly.
2. Remove the Glide Pad Assembly.
3. Remove the following screws (14), (16), (17) as shown in the picture below and take out
carefully the top cover.
Fig. 30: Removing the plastic top cover
Removing the RTC Battery, Microphone and connector
1. Once you have removed the top cover disconnect the RTC battery (B), the Microphone (C)
and the connector (C) as shown in the picture below and put these items aside.
Fig. 31: Removing the RTC battery (B), the microphone (C) and connector (A)
(14)=M2x6
(16)=M2.3x4
(17)=M2x6