NEC P520 - Manual (Page 16)

NEC Versa P520 Disassembly Manual Page 16
Fig. 25: Removing the 4 screws retaining the glide pad
7. Disconnect the glide pad internal flat cable in order to separate the glide pad
electronic form the metal support.
Fig. 26: Disconnecting the glide pad internal flat cable
Removing the Hard disk drive
1. Remove the keyboard cover.
2. Remove the Keyboard.
3. Remove the glide pad assembly without disassembling the glide pad module.
4. Remove the screws (17) holding the hard disk drive assembly and disconnect the
hard disk drive as shown in the following picture.
Fig. 27: Removing the hard disk drive assembly
(16)=M2x4
(17)=M2x4.5