Napco Security Technologies GEM-K2AS - Manual (Page 9)

9
Arming in STAY Mode
Interior Zones, when bypassed, allow free movement within the premises while the protection of
armed perimeter zones is maintained. Enter your code, then press P . The red ARMED
light will turn on and the green STATUS light will blink, indicating zones bypassed. After the exit
time has elapsed, the window will display "ARMED".
Easy Exit (Optional - Easy Exit programmed? !YES !NO)
Your system may have been programmed for Easy Exit, which allows a user to exit the premises
while the system is armed STAY. By activating Easy Exit while the system is armed STAY, the
Exit Delay countdown will take place, during which time you are permitted to leave through the exit
door. The Easy Exit Delay time will be identical to the Exit Delay time the system gives you each
time it is armed STAY. This will allow, for example, an early morning commuter to exit the house,
without having to disarm and rearm the system, awaking the family.
!
Press
U
to activate Easy Exit on your system. (GEM-P3200/GEM-P9600 V20 or greater, GEM-P816/P1632 V9A or greater)
AR M I N G S T AY : P R O T E C T I N G Y O U R S E L F AT H O M E
B Y P A S S E D I N T E R I O R
A C O N
READY
B Y P A S S E D
A C O N
SYSTEM
READY