Navigon 7200T - Manual (Page 114)

96 NAVIGON 7200T User’s Guide October 2008
NAVIGON, INC.
Routes
Navigation
8. Follow navigation to your destination.
After reaching your destination, logbook stops recording and adds an entry to the
Logbook.xls file. The Logbook icon no longer displays.
Stop recording for a single route
Once you have turned on logbook recording, you can stop recording for individual routes.
1. Start Logbook recording. (See page 141.)
2. Create a new route, load a saved route, or select a destination.
3. Tap the Start Navigation button.
The R EASON FOR THE T RIP TAB opens.
4. Tap .
The following message displays.
5. Tap OK .
Logbook is not recording for this trip. However, recording will start again for all
subsequent routes,
Calculating and displaying routes
On the R OUTE P LANNING WINDOW :
1. Load a saved route.
- OR -
2. Enter a starting point and at least one route point.
3. Tap the
Show Route button.
The map opens in Preview mode .
The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.
4. Tap the Start Navigation button or simply start driving.
Note: Once logbook recording starts, every movement of the vehicle is recorded, even
when you are not navigating on-route.