Navigon 7200T User Manual
Page 145
Hands-Free Operation (Bluetooth)
Connecting (Pairing) with a Mobile Phone
October 2008
NAVIGON 7200T User’s Guide
127
NAVIGON, INC.
The mobile phone prompts you to enter a PIN code.
5. Enter a four-digit PIN code.
On the navigation device:
The
NAVIGON 7200T
prompts you to enter a PIN code.
6. In the PIN Code field, enter the same PIN code that you entered on the mobile
phone.
7. Tap OK.
The
H
ANDS
-F
REE
M
AIN
WINDOW
displays. A connection is established between the
two devices.
On the
NAVIGON 7200T
H
ANDS
-F
REE
M
AIN
WINDOW
, the Keypad, Address Book,
and Recent Calls buttons are now available. The Bluetooth status icon in the
upper right-hand corner displays in gray (
).
Terminating the connection between the NAVIGON 7200T and the
mobile phone
You can terminate the connection between the
NAVIGON 7200T
and the mobile phone
at any time.
In the
H
ANDS
-F
REE
S
ETTINGS
WINDOW
:
1. Tap Mobile Phone Connection > Delete Device.
You will be prompted to confirm that you want to terminate the connection.
2. Tap OK.
On the
NAVIGON 7200T
H
ANDS
-F
REE
M
AIN
WINDOW
, the Keypad, Address Book,
and Recent Calls buttons are no longer available. The Bluetooth status icon in
the upper right-hand corner displays in red (
).
You must establish the next connection to a mobile phone manually. (See “Connecting
(Pairing) with a Mobile Phone” on page 125).
Note: A PIN code can be any four digits. However, the same 4 digit PIN code must
be provided to the navigation device in order to complete the pairing.
Note: You don't need to terminate the connection manually. The connection is ter-
minated automatically when the mobile phone moves out of range (approximately
30 feet (10 meters) from the
NAVIGON 7200T
). Connection data is saved so that the
connection can be restored automatically when the mobile phone comes back into
range.
Note: When the connection is terminated using this procedure, the
NAVIGON
7200T
can not establish an automatic connection to a mobile phone, including the
same mobile phone as for the last connection.