Navigon 7200T - Manual (Page 43)

Basic Operations
Viewing device status
October 2008 NAVIGON 7200T User’s Guide 25
NAVIGON, INC.
Viewing device status
Symbols located at the top right of the screen are used to display information.
GPS
The GPS symbol can show the following GPS reception status:
No Symbol The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
No Signal Data is being received from less than three satellites. Position
cannot be calculated.
GPS Ready Data is being received from at least three satellites. Position can
be calculated.
Power
The Power symbol can display the following conditions of the built-in battery:
The device is powered by an external power source. The battery is charging.
The device is powered by its internal battery. Battery is fully charged.
The device is powered by its internal battery. Battery charge is sufficient.
For more information, see “About GPS navigation” on page 6.
For more information on recharging your device, see “Charging the battery” on
page 10.