NEC LT10 - Manual (Page 14)

-
nglish
Installation
Adjusting the Projected Image
Adjusting the Projector Height
Tilt Adjusted wheel
Adjustable Tilt
Foot
1
2
3
Adjustable Tilt
Foot Button
The projector is equipped with an adjustable tilt foot foot for
adjusting the projector height.
To raise the projector:
1. Press the adjustable tilt foot button n .
2. Raise the projector to the desired display angle
o
, then
release the button to lock the adjustable tilt foot into
position.
3. Use
p
to fine-tune the display angle.
To lower the projector:
1. Press the adjustable tilt foot button.
2. Lower the projector, then release the button to lock the
adjustable tilt foot into position.
3. Use p to fine-tune the display angle.