NEC LT10 - Manual (Page 18)

$
-
nglish
The Projector has multilingual On Screen menus that are
multilingual allowing you to make image adjustments and
change a variety of settings. The projector will automatically
detect the source.
How to operate
1. To open the OSM menu, press “Menu” on the Remote Control or
Control Panel.
2. When OSM is displayed, use keys to select the main menu.
While making a selection on a particular page, press “Enter / ”
key to enter sub menu.
3. Use keys to select the desired item and adjust the
settings by key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu”again. The OSM menu will close and the
projector will automatically save the new settings.
On Screen Menus
User Controls
Main Menu Sub Menu Setting