NEC MT 820 - Manual (Page 23)

Connecting Your Remote Mouse Receiver
The remote mouse receiver enables you to operate your computer's mouse functions from the NEC
MultiSync MT1020/MT820 remote control. It is a great convenience for clicking through your
computer-generated presentations.
To connect the remote mouse receiver:
1. Turn off your computer.
2. For PCs: Remove your current mouse and connect the serial cable from the remote mouse
receiver to your PC's mouse port. (Use the 6-pin adapter for connecting to a PS/2 computer.)
For Macintosh: Remove your current mouse from your computer, attach the Macintosh adapter
to the remote mouse receiver's serial cable, and connect the receiver to your mouse port.
3. When the remote mouse receiver is installed, it will disable your regular mouse, disconnect the
remote mouse receiver and restart your computer.
IBM PC/AT
IBM PS/2
Macintosh
INSTALLATION
43
44