NEC MT 820 - Manual (Page 24)

Ⅵ
The Remote Mouse Receiver as a mouse for your computer
Serial cable (supplied)
Ⅵ The Remote sensors on the projector cabinet work as the remote sensor on the Remote
Mouse Receiver
Remote cable
(supplied)
Ⅵ
You can daisy-chain as many as five LCD projectors and operate them with the same
remote control. To do so:
1. Turn off your projectors.
2. Use the remote control cables supplied to connect the Remote Control Output of one projector to the Remote
Control Input of the next until all the projectors are connected.
Remote cable (supplied)
INSTALLATION
45
46
Serial cable
(supplied) REMOTE CONTROL
OUTPUT
REMOTE CONTROL
OUTPUT REMOTE CONTROL
OUTPUT
REMOTE CONTROL
INPUT REMOTE CONTROL
INPUT
REMOTE CONTROL
INPUT
Remote cable (supplied) Remote cable (supplied)