NetComm HS1100 - Manual (Page 140)

HS1100 Wireless Hotspot Gateway User Manual
139
y Change admin password
Besides supporting the use of console management interface through the connection of null modem, the
system also supports the SSH online connection for the setup. When using a null modem to connect to
the system console, we do not need to enter administrator’s password to enter the console management
interface. But connecting the system by SSH, we have to enter the username and password.
The username is “admin” and the default password is also “admin”, which is the same as for the web
management interface. Password can also be changed here. If administrators forget the password and
are unable to log in the management interface from the web or the remote end of the SSH, they can still
use the null modem to connect the console management interface and set the administrator’s password
again.
Although it does not require a username and password for the connection via the serial port, the same
management interface can be accessed via SSH. Therefore, we recommend you to immediately change
the HS1100 Admin username and password after logging in the system for the first time.
y Reload factory default
Choosing this option will reset the system configuration to the factory defaults.
y Restart HS1100
Choosing this option will restart HS1100.