NetComm HS1100 User Manual
Page 194
Advertising
HS1100 Wireless Hotspot Gateway User Manual
193
2) Right click on the Local Area Connection icon
and select “Properties”.
3) Select “Internet Protocol (TCP/IP)” and then
click Properties. Now, you can choose to use
DHCP or a specific IP address.
4) Using DHCP: If you want to use DHCP, choose
“Obtain an IP address automatically”, and then
click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from HS1100.
Advertising