Nokia M1122 User Manual
Page 90
E
Copyright Nokia Networks Oy
C33906001SE_00
5-55
Vbridge commands
Command
Switch on/off IP function in vbridge
Description
Switches on/off IP function.
Syntax
[no] ip address <ip-address> <ip-mask>
Arguments
no
switches off IP function.
ip-address
is the IP address of the Vbridge in dotted
decimal notation.
ip-mask
is the subnet mask in dotted decimal nota-
tion.
Example
M1122(conf-vbridge)#ip address nnn.nnn.nnn.nnn
255.255.255.0
M1122(conf-vbridge)#
Command
Switch on/off RIP receive function in vbridge
Description
Switches on/off RIP receive function. When enabled,
M1122 receives Routing Information Protocol mess-
ages from other routers.
Syntax
[no] ip rip-receive {rip-receive-mode}
Arguments
no
switches RIP receive function off.
v1
receive-mode selects RIP version 1.
v2
receive-mode selects RIP version 2.
both-v1v2
receive-mode selects both RIP version 1
and version 2.
Example
M1122(conf-vbridge)#ip rip-receive v1
M1122(conf-vbridge)#
Command
Disable/enable management through the vbridge
Description
Enables/disables the management of M1122 through
the vbridge.
Syntax
[no] ip admin-disabled
Arguments
no
enables management through the ATM channel.
Example
M1122(conf-vbridge)#ip admin-disabled
M1122(conf-vbridge)#