Nokia M1122 User Manual
Page 96
E
Copyright Nokia Networks Oy
C33906001SE_00
5-61
Command
Set DHCP address range
Description
You can define to DHCP address ranges with this com-
mand. The default pool is the IP address of the inter-
face with a subnet mask 255.255.255.0.
If you don’t define an address range, up to two ranges
will be defined automatically for ETH/VBRIDGE inter-
faces, in this order, if the interface has an IP address.
Syntax
[no] dhcp address <scope> <pool-base> <pool-mask>
<pool-size>
Arguments
no
switches of address pool.
scope
defines the pool. Values are
1
and
2
.
pool-base
is the first IP address in the pool in dotted
decimal format.
pool-mask
is the subnet mask of the pool addresses.
pool-size
is the size of the address pool, 0...254.
Example
M1122(conf-common)#dhcp address 1 168.190.1.1
255.255.255.0 100
M1122(conf-common)#
Command
Set DNS address for DHCP clients
Description
Defines a DNS address for the DHCP clients.
Syntax
[de | no] dhcp dns <scope> <class> <dns-server>
Arguments
scope
defines the DHCP pool (1 or 2).
class
defines whether the server is a
primary
or a
secondary
server.
dns-server
is the IP address of the DNS server.
Example
M1122(conf-common)#dhcp dns 1 primary 190.168.2.1
M1122(conf-common)#