NAD S500i User Manual
Page 7
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
7
TROUBLESHOOTING
NO POWER
• Power Mains cable unplugged or power
not switched on
• Check if AC Mains cable is plugged in and
power switched on
Problem
Cause
Solution
DISC PLAY DOES NOT START
• The disc is loaded upside down
• The disc is too dirty
• Reload the disc with the label side UP
• Clean the disc
NO SOUND
• Incorrect audio cable connections
• Incorrect amplifier/receiver operation
• Connect the CD player to the amplifier/
receiver correctly
• Make sure that the input selector on your
amplifier or receiver is set correctly
A “HUMMING “SOUND CAN BE HEARD
• Loose cable connections
• Check the cable connections, particularly
the phono connecting cable
REMOTE CONTROL NOT WORKING
• Batteries flat, or incorrectly inserted
• IR transmitter or receiver windows
obstructed
• Check or replace batteries.
• Remove obstruction
SOUND SKIPS
• The CD player is subject to vibration or
physical shock from external sources
• Disc is dirty
• Change the installation location
• Clean the disc