NEC PF32WT100 - Manual (Page 12)

13
PICTURE MENU
-You can select the picture quality instantly.
To Select the Picture Mode
1. Press the menu button to select the PICTURE and then displayed on
the right appearances. By pressing the OK button or NORMAL
button, the following three modes change cyclically.
FAVOURITE > NORMAL I > NORMAL II
- The current selected picture mode is displayed in the menu header.
- The FAVOURITE mode contains the settings that you last entered.
2. You can select the BRIGHTNESS, CONTRAST, COLOUR,
SHARPNESS, TINT and PIC.TILT with CURSOR UP (A6)/DOWN
(A21) buttons.
After selecting items, you can adjust each level with CURSOR LEFT
(A7)/RIGHT (A20).
3. NOISE RED (NOISE REDUCTION) feature is selected On/Off
according to your preference.
4. PIC.TILT feature adjusts a tilt of displayed picture with CURSOR
LEFT (A7)/RIGHT (A20).
The red point of bar represents the center tilt of picture.
5. If the NTSC standard is detected, then TINT will available.
Otherwise TINT will be displayed, but not selectable.
PICTURE FAVOURITE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
NOISE RED
PIC. TILT
OFF
POSITION ADJUST
EXIT OK PRESET MENU