Roland KR-115 - Manual (Page 115)

115
Chapter 5 Recording and Saving the Performance
Chapter 5
5.
Touch <Media> to select the storage media to be initialized.
6.
Touch <Execute>.
A confirmation screen appears. If you want to quit the initialization, touch <Cancel>.
7.
Touch <OK>.
Initialization of the external memory begins.
When initialization is completed, you’re returned to the previous screen.
NOTE
Do not remove the storage
media until the initialization is
completed.
NOTE
Do not eject the floppy disk
while data is being read from
or written to the disk. This
may scratch the disk’s
magnetic surface, rendering
the memory unusable. (The
disk drive’s indicator lights
brightly while data is being
read from or written to the
disk. At all other times, the
indicator is lit more dimly, or
is not lit at all.)
NOTE
If “Error” appears on screen,
take a look at “Error
Messages” (p. 201).
KR117_115_r_e.book 115 ページ ２００６年２月２７日 月曜日 午前１１時５５分