Roland KR-115 - Manual (Page 200)

200
Troubleshooting
Appendices
KR operation is
sluggish when
external memory is
connected
Is <Mode> in the “External Display
Setting” set to “Slide Show?”(p. 186)
If the connected external memory contains
data to be used in a slide show, the slide
show will begin automatically.
Set <Mode> in the “External Display
Setting” to a value other than “Slide Show.”
Lyrics are not
indicated properly
in the display
With some music files, the lyrics cannot be
displayed correctly.
If you press a button while the lyrics are
being shown in the display, the lyrics will
disappear. To recall them, touch
< > in the Piano or Basic screen, or
press the [ (Play/Stop)] button.
In the notation screen, some lyrics or notes
could extend beyond the edges of the
screen, and not be displayed.
Notation is not
indicated properly
in the display
If you select a part that does not contain
performance data, notes will not be
displayed in the notation. Change the part
that is displayed (p. 89).
The notation screen feature is particularly
unsuitable for the display of difficult,
complex musical works that demand
accurate notation. Refer to “Notes
Regarding the Notation Display” (p. 87).
In the notation screen, some lyrics or notes
could extend beyond the edges of the
screen, and not be displayed.
Movement of
notation or
keyboard display
not smooth
There may be times when a complex variety
of information is being displayed or when a
large amount of data is displayed at one
time. Change the notation display settings as
described below (p. 89).
- Set “Bouncing Ball” to “Off”
- Set “Color Notation” to “Off”
- Set “Keyboard” to “Off”
- Set “External Display (p. 187)” to “Panel”
Song becomes
unstable
In certain cases, such as when playing
songs on external memories, the song may
lag when excessive amounts of
performance data are used.
Unable to play
back internal
songs
Have you pressed the remote control’s
[MUTE] button, muting the sound?
Unable to play
back audio files
The KR can play back audio files in the
following format.
• “.WAV” extension
•
16bit linear
• Sampling rate of “44.1 kHz”
• Stereo
Case Cause/Remedy
Can’t record
Can’t record
Has one of the track buttons for recording
been selected? (p. 110)
Has the setting for “Punch-in Recording”
(p. 142) or “Tempo Recording” (p. 151)
been made?
Select the replace recording method (p.
140).
It is not possible to record while the
notation is being generated. Once the unit
has finished generating the notation (i.e.,
when the measure number in the screen is
no longer highlighted), try the operation
once again.
You cannot overdub with audio files and
audio CDs.
Tempo of recorded
song or
metronome is off
If you select an internal song in which the
tempo changes during the song, and then
record, the tempo will change in the same
way for the performances that are recorded
on the other tracks. The tempo of the
metronome will also change in the same
way.
If you record additional material without
erasing the previously recorded song, the
song will be recorded at the first-recorded
tempo. Please erase the previously
recorded song before you re-record (p. 111).
The recorded
performance has
disappeared
Any performance that has been recorded is
deleted when the power to the KR is turned
off or a song is selected. A performance
cannot be restored once it’s been deleted.
Be sure to save it on an external memory or
User Memory before you turn off the
power (p. 116).
A screen asking if I
want to “OK to
delete Song?”
suddenly appears.
Is the <Auto Start> set to “On?”(p. 180)
If no action is taken for a certain period of
time while Auto Start is set to ON, the
demo starts playing automatically.
If there is any performance you have
recorded at that time, a confirmation screen
asking you if you want to delete the song
appears in the display.
If you want to return to the previous screen
and continue with the recorded
performance, touch <Cancel>.
If you touch <OK>, the song is deleted and
the demo song begins.
Case Cause/Remedy
KR117_115_r_e.book 200 ページ ２００６年２月２７日 月曜日 午前１１時５５分