Roland Portable Recorded R-26 - Manual (Page 38)

Recording
38
2.
Touch the <LOW CUT> or <LIMITER>
icon to turn it on/off .
ANALOG IN Settings
Here you can make settings for the ANALOG
IN 1/L jack and ANALOG IN 2/R jack input
type, phantom power supply, and MS mic.
Set the limiter and low-cut filter settings in
the same way as for the internal mic (p. 36).
Setting the input type
The two inputs can be used as monaural x
2 or as stereo x 1. In addition, you can also
use an MS type stereo mic.
1.
Choose [MENU] Ú <INPUT
SETUP> Ú <ANALOG IN> .
2.
Touch <INPUT TYPE> .
3.
Select the type .
Setting Description
SEPARATE
Settings can be made separately
for the ANALOG IN 1/L jack and
ANALOG IN 2/R jack.
LINK
Settings for the ANALOG IN 1/L
jack and ANALOG IN 2/R jack will
be linked as a stereo pair.
MS-MIC
The ANALOG IN 1/L jack and
ANALOG IN 2/R jack will provide
for MS type stereo input.
* If MS is selected, you must use a MS mic
that directly outputs the mid signal and
the side signal. Connect the mid signal
to the ANALOG IN 1/L jack, and the side
signal to the ANALOG IN 2/R jack.
* When SEPARATE is selected, you can
make settings for phantom power,
limiter, and low-cut filter separately for
both the ANALOG IN 1/L jack and the
ANALOG IN 2/R jack.
4.
Touch <BACK> twice to return to the
menu screen (p . 18) .