Roberts Gorden Caribe CGTH-50 - Manual (Page 25)

SECTION 4: I NSTALLATION
19
FIGURE 10: Horizontal Installation
4.13 45° Tilted Installation
For tilted installations:
1. Determine if the heater is going to be tilted left or
tilted right (Figure 11). Select the suspension point
for left or right tilting. Two suspension points must
be used for the front hanger.
2. The uppermost snap hook can now be installed on
the suspension hardware that you have installed
for suspension of the unit. An additional length of
chain may also now be installed, if required, to
lower the heater.
FIGURE 11: 45° Tilted Installation
Front Fixed Hanger
Rear Movable Hanger
Snap Hooks
Tilted Right
Use both suspension
points for installation
Tilted Left
Snap Hooks