Roberts Gorden Caribe CGTH-50 - Manual (Page 38)

CGTH I NSTALLATION , O PERATION AND S ERVICE M ANUAL
32
2. Route thermostat wiring between the thermostat
and the rear of the heater. Carefully staple the
wires so as not to damage them and to produce a
professional appearing installation.
3.Connect thermostat wires to the "THERMOSTAT
CONNECTION" (See Figure 31) on the rear sur-
face of the burner as follows:
A. Using an appropriate crimping tool, install the
female terminals (included in accessories
bag) on the two wires from the thermostat.
B. Push the female terminals on the male termi-
nals. The thermostat terminals are not polarity
sensitive.
FIGURE 31: Thermostat Installation Rear View
Thermostat
Connection
Wire from thermostat.
See Thermostat Instructions.