Raymarine Compass Instrument ST40 - Manual (Page 33)

24 ST40 Compass Instrument Owner’s Handbook
USER CALIBRATION
Entry
screen
Set compass
heading
response
for approximately 2 seconds hold down and
15 (fast)
1 (slow)
D4780-2
COMPASS
Increase
Decrease
Set heading
alignment
Linearise
transducer
COMPASS ST40
CAL
CAL
COMPASS ST40
CAL
Set variation
CAL
Set True/Magnetic
CAL
Increase value
Decrease value
Deviation
HDGT
To bypass
linearisation
When linearisation successful
(3 beeps)
To linearise compass
If vessel is turned
too fast during
linearisation, a
SLO legend is
displayed
CAL
During normal operation
for approximately 2 seconds hold down and
To save your settings and return to normal operation from any screen,
ST40
COMPASS ST40
COMPASS ST40
COMPASS ST40
COMPASS ST40
Repeater Master
Flashing
segment = North
2 turns
minimum
Note:
If there is no key
activity when the
Entry screen is
displayed, calibration
will time out to
normal operation
after 5 seconds,
161_2c04.p65 01/05/01, 16:52 24