Raymarine Compass Instrument ST40 - Manual (Page 35)

26 ST40 Compass Instrument Owner’s Handbook
DEALER CALIBRATION
CAUTION:
Do NOT switch the Boat Show mode on.
This function must only be used for
demonstration purposes.
Entry
screen
D4782-2
for approximately 12 seconds hold down and
Calibration
access
Boat show
mode
COMPASS ST40
CAL
Return to normal
operation with
factory defaults
applied
If
If
COMPASS ST40
CAL
COMPASS
COMPASS ST40
CAL
During normal operation
for approximately 2 seconds hold down and
To save your settings and return to normal operation from any screen,
Factory
defaults
ST40
Note:
If there is no key activity when the
Entry screen is displayed, calibration
will time out to normal operation
after 5 seconds,
161_2c04.p65 01/05/01, 16:52 26