Roland PC-70 User Manual
Page 22
22
Controllers 96 and above (NRPN/RPN, Channel Mode Messages)
Controller No. Control Function
96.
Data Increment
97.
Data Decrement
98.
Non-Registered Parameter Number LSB
99.
Non-Registered Parameter Number MSB
100.
Registered Parameter Number LSB
101.
Registered Parameter Number MSB
102–120
Undefined
121–127
Reserved for Channel Mode Messages
fig.controller.e
[Procedure]
1.
Set the MIDI transmit channel to match that of the desired Part.
2.
Press
MIDI/SELECT [3]
(LED will show “SEL”).
3.
Press the
F4 white key (CC SELECT) [13]
.
4.
Select the Controller Number by pressing keys in the
NUMERIC ENTRY section [17]
.
5.
Press
ENTER [19]
.
6.
Press
MIDI/SELECT [3]
again to confirm your selection. Now you can use the
DATA
ENTRY slider
to transmit the value of the specified Controller Number.
Select CC
Numeric Key Pad
Enter