RCA RS1286B - Manual (Page 11)

5
EN
Display
Showing the Demonstration
Press and hold DEMO/DIMMER for more than 2 sec-
onds to turn on/off demonstration mode. The
demostration scrolls through all display operations.
DISPLAY CLOCK/TIMER
Setting the Time
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press PRESET UP or DOWN to set the hour and
then press CLOCK to shift to minute digits.
3. Press PRESET UP or DOWN to set the minute.
4. Press SET to save settings.
Press STOP at anytime in clock setting mode to quit
setting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds (not
available in Tuner FM mode).
Setting the Timer
1. Press and hold TIMER until the hour flashes on the
display. (ON - timer on time).
2. Press PRESET UP or DOWN to set the hour and
then press TIMER to shift to minute digits.
3. Press PRESET UP or DOWN to set the minute.
Press SET to save the setting.
4. Press TIMER to shift to volume setting with flash-
ing VOL XX on the display. Adjust volume between
levels 5 and MAX (to prevent volume being too low)
with the VOLUME UP/ DOWN.
5. Press TIMER to set the off hour. (OF - timer off
time)
6. Repeat steps 2-3 to set the timer off time.
7. Press SET to save the settings.
(Note: you can also set the timer off time separately
when the unit is in CD, Tuner or Tape mode)
Activating the Timer
Press and release TIMER ON/OFF to turn
on/off the alarm. The alarm is active when
the clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and release DEMO/DIM-
MER.
2. Press DEMO/DIMMER to select
the desired level (DIMM 1 - 3).
Sleep Mode
You can select the time interval in minutes for the
unit to turn off automatically. Press SLEEP on the
remote to select among 5, 15, 30, 60 & 90 minutes.
BASS
SURROUND
DIM 2
Tip: DEMO
Mode does
not affect the
current system
operation. When the
system is initially plugged
in, DEMO mode is acti-
vated.
RS1286B-EN NEW 5/2/01 4:46 PM Page 9