RCA RS1286B - Manual (Page 14)

8
1. Press TUNER to select the radio.
2. Press TUNER again to change the radio band.
Choices are:
AM/FM (RCA models)
The tuner can be either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
Tuning to a Station
Press TUNING UP/ DOWN
to select frequencies.
Using Presets
Press PRESET UP or DOWN to access the previous or
next preset station. The display first shows the preset
program number and after
a few seconds, the fre-
quency and then the pre-
set program number
again.
Auto Preset Programming
(FM BAND ONLY)
Press and hold TUNER button for 2 seconds to scan
stations in FM band. The stations will then be stored
as preset channels. A maximum of 32 stations can be
stored. Beware of your preset channels being erased
accidentally because the scanning and storing process
is automatic upon pressing and holding TUNER but-
ton.
You can stop the automatic scan by pressing TUNER
button, but the erased stations cannot be recovered.
Setting Presets
1. Press TUNING UP/ DOWN to access the desired
frequency.
2. Press the SET button once.
3. The most recently accessed
program location will be dis-
played together with a
blinking PROG icon.
4. If a different program
location is preferred, press PRESET UP/ DOWN to
move to the desired preset number (1-32).
5. Press SET to store the selected frequency at that
preset.
Suppressing Stereo Signal
Press FM STEREO to toggle between FM mono and
stereo for stereo FM stations.
FM
P:01
87.50 MH z
PHONES
STANDBY
POWER
V O L U M E C O N T R OL
BASS
BOOST
CD
TUNER
TAPE
INTRO REPEAT TIMER ON / OFF DEMO /
DIMMER FM ST . /
MONO
CLOCK
P R E S E T
E
Q
BAND
SHUFFLE
PROG / SET • PRESET •
D IG ITA L T U NIN G
CD DIRECT PLAY
Tip: Your audio system has 32 preset stations.
Tip: Press DIGITAL TUNING UP/
DOWN for more than 1 second to
automatically tune up/down the band
for the next station.
EN
TUNER
PROG
FM
P:01
RS1286B-EN NEW 5/2/01 4:46 PM Page 12