RCA RS1286B - Manual (Page 13)

7
EN
CD PLAYER
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the tray, while a CD is
playing.
2. Load discs on available trays.
3. Press OPEN/CLOSE to close the tray.
Shuffling the Play Order
Press SHUFFLE to turn on/off the playing of tracks in
random order.
Sampling Tracks
Press INTRO to play the
first 10 seconds of each
track on the current disc,
all discs in the tray, or turn
INTRO mode off.
Repeating the Play Order
Press REPEAT to repeat the current track, current disc,
all discs, or turn REPEAT mode off.
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press SET to enter
PROGRAM mode. The system displays the
next available program number: “- - P:01,” with
“- -” flashing, prompts you for the first track in the
program list.
2. Press SKIP FORWARD/
BACK-
WARD to select a track (press DISC SKIP or DISC 1 -
DISC 5 to select a track from a different disc).
3. Immediately press SET to assign the selected track
to the program number. You are then prompted for
the next track in the program list.
Playing a Program List
While in PROGRAM mode, press PLAY.
Displaying the Program
List
1. While the CD player is
stopped, press SET to
enter PROGRAM mode.
2. Press SET repeatedly to
list each track assignment
in the program list.
Deleting Program List
While in PROGRAM mode, press and hold STOP for 5
seconds. The system displays the message CLEAR.
Skipping a Disk
Press DISC SKIP.
Searching Through a CD
Press and hold SKIP FORWARD/ BACKWARD to
search through a CD as it is playing.
More Tips on Playing and Setting Program:
• Direct Play function: Press DISC 1-5 or PLAY for direct play-
back when the unit is in standby, CD, Tuner and Tape mode. However,
this function does not activate when tape is being played.
• Press CD key to see the total disc time after reading the total no. of tracks in
CD stop mode.
• During CD playback, press CD key to toggle among the displays of Track elapsed
time, track remaining time, disc elapsed time, disc remaining time and total number of
tracks for the current disc.
• You can create a program of up to 32 tracks.
5 P:01
DISC 1
D
IS
C
5
DIS
C
2
DISC
4 DISC
3
RS1286B-EN NEW 5/2/01 4:46 PM Page 11