6 connections to the vx-8d and dhd controller, Connector panel access, Connecting the dhd controller to the vx-8d – Runco VIDEOXTREME VX-8D User Manual
Page 45: Digital video connection, Connections to the vx-8d and dhd controller, 10. connecting the vx-8d to the dhd controller, Pre l iminar y
Runco VX-8d Installation/Operation Manual
29
PRE
L
IMINAR
Y
3.6
Connections to the
VX-8d and DHD
Controller
Proceed as follows to connect the DHD Controller to the VX-8d, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel Access
To access the connector panel, pull firmly
on the cable access cover to open it.
Connecting the DHD
Controller
to the VX-8d
Digital Video Connection: Connect the HDMI Output of the DHD Controller to the DHD
Input of the VX-8d as shown in Figure 3-10.
Figure 3-10. Connecting the VX-8d to the DHD Controller
RS-232
RS-232
DHD INPUT
DHD INPUT
AC
AC
HDMI
OUT
RS-232
OUT