Runco VIDEOXTREME VX-8D - Manual (Page 46)

Installation
30 Runco VX-8d Installation/Operation Manual
PRE
L
IMINAR
Y
RS-232 Connection: Connect the Display Control output from the DHD Controller to
the RS-232 input on the VX-8d. Use a standard, modular telephone cable with RJ11
plugs at both ends. On the VX-8d end, use the provided RJ11-to-DB9 adapter. This
adapter is wired as shown in Figure 3-11.
Figure 3-11. RS-232 Connection from the DHD Controller to the VX-8d
3
4
XMT DATA RCV DATA
3
2
RCV DATA XMT DATA
2 5
SIG GND
NO CONNECTION 1, 5, 6
1, 4, 6,
7, 8, 9
To/From
DHD
Controller
VX-8d
6-position
RJ-11 Male
DB-9 Male
6
1
1
6
RS-232
RS-232