Ratoc Systems PCIFW1U - Manual (Page 22)

W
indows
M
e
19
Check here
Step2.Verify the OHCI driver installation
When you insert the PCIFW1U into a PCI slot, the OHCI driver is installed
automatically by the Hardware Wizard. To verify the OHCI driver installation,follow steps
through.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.You will see the screen below. Click the Device Manager tab.
4.Double-click “1394 Bus Controller”.
5.If there is a NEC Firewarden OHCI Compliant IEEE 1394 Host Controller string
without any yellow “!” marks or red “X” marks under the 1394 Bus Controller,
the OHCI driver for the PCIFW1U is installed correctly.