Ratoc Systems PCIFW1U - Manual (Page 34)

W
indows98
W
indows98SE
31
3-2-1.Windows 98/Windows 98SE CCD Camera Setup
When the CCD camera is connected,the CCD camera will be recognized automatically.
To verify the CCD driver installation, follow steps through.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.Click the Device Manager tab.
4.Double-click “Imaging Device”.
5.If there is a CCD camera name string without any yellow “!” marks or red “X” marks under the
[Imaging Device] as shown below, the driver is installed correctly.
Check here