Ratoc Systems PCIFW1U - Manual (Page 29)

W
indows98SE
26
3-1-2.Windows 98 Second Edition DV Driver Setup
Step. Verify the DV driver installation
When you connect a DVCAM on Windows 98 Second Edition, the DV driver will be installed
automatically. To verify the DV driver installation, follow steps through.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.Click the Device Manager tab.
4.If there is a “Microsoft DV Camera and VCR” string without any yellow “!” marks
or red “X” marks under the [Imaging Device] as shown below, the DV driver is installed
correctly.
NOTE
Microsoft DVCAM driver “MSDV.SYS” is compatible with all DVCAMs that
supports Standard AVC/FCP command set, manufactured by SONY, Panasonic,
Canon, JVC and others. You can check these DVCAMs by i-Link logo mark or DV
trade mark.
Check here