Chapter 3. connect and disconnect, Connect to computer – RCA M5001 User Manual
Page 20
10
Chapter 3. Connect and Disconnect
Connect to Computer
Note: If the Windows Media Player on your computer is below version 10, upgrade
it via Internet beforehand, to help system recognize M5001/M5002 in MTP
mode.
Note: Power up the device to establish USB connection if the unit is in battery
charging mode. Make sure the lock key is in Unlock position.
1. On the bottom side of M5001/M5002, you could see a USB (B type, female) port.
2. Plug mini USB (B type, male) end of supplied USB cable to M5001/M5002, and
plug USB (A type, male) end to your computer. Then turn on M5001/M5002.
3. Once M5001/M5002 is connected to computer, it should be detected by operating
system. And you can manage files within or copy files from the computer.
4. You would see below figures during connection. The left one means
M5001/M5002 is connected to computer, and the right one means
M5001/M5002 is under reading and writing processes.