RCA M5001 - Manual (Page 21)

11
Chapter 4. Basic Usage
This chapter introduces the basic usages of M5001/M5002. Please read carefully to
know how to operate your device. Note that the figures below are for reference only.
Power On
Before operation, you have to turn on the device first. Follow the steps below to turn
on M5001/M5002.
1. Press Play/ Pause button once.
2. The screen will display the Start Logo.
3. Then you will see the Main Menu on the screen, the
device is ready to function.
Note: if M5001/5002 can not be turned on, please check the
Lock switch and battery capacity.
Power Off
Once the device is turned on, you can turn it off in any mode. Follow the steps below
to turn off your M5001/M5002.
1. In any modes, press button for about 2 seconds.
2. The screen will display the Power Off Logo.
3. Then the screen will be all dark, the device is turned off.
Note: if M5001/M5002 does not response for several minutes,
press for about 5 seconds to force shut down.
Select and Enter a Function
M5001/M5002 supports multi-function, follow steps below to operate.
1. On Main Menu, press or button to select a function.
The function icon shows at left side.
2. Stop at the function needed, and press OK key to enter the
function.
3. Then you see the submenu of selected function.