Rockford Fosgate X2 - Manual (Page 7)

7
I
NSTALLATION
10. Perform a final check of the completed system wiring to ensure that all connections are
accurate. Check all power and ground connections for frayed wires and loose connections
which could cause problems. Install the fuse into the fuseholder.
NOTE: Follow the diagrams for proper signal polarity.
CAUTION: These amplifiers are not recommended for impedance loads below 2
Ω
stereo and 4
Ω bridged (mono).
!
Power
Connection
Bridged/Mono Wiring
2-Channel Wiring