Radio Shack 63-968 - Manual (Page 10)

10
To place the clock on a flat surface, turn the base on the bottom
of the clock clockwise until it stops, then place the clock on the
surface.
To mount the clock on a wall using hook-and-loop tape (not
supplied), follow these steps.
1. Use a damp cloth to clean the back of the clock. Let the
surface dry.
2. Remove the backing from one side of the tape and stick
that side to the back of the clock.
Note: Do not place the hook-and-loop tape over the clock’s
battery compartment cover.
3. Remove the backing from the other side of the tape and
press the clock firmly onto the mounting surface.
63-968.fm Page 10 Friday, July 2, 1999 2:19 PM