Radio Shack 63-968 - Manual (Page 15)

15
SPECIAL FEATURES
MANUALLY SETTING THE TIME,
DATE, AND LANGUAGE
When you turn off automatic time setting or if the clock does not
receive a good radio signal, you can manually set the time and
date.
Important: The clock automatically updates the time and date
whenever you program it to automatically set the time and date
(see “Turning Automatic Time Setting Off/On” on Page 16) and
it receives a good radio signal. If you do not want this to hap-
pen, turn off automatic time setting.
1. Repeatedly press ZONE/AUTO OFF to select the desired
time zone. As you press ZONE/AUTO OFF , the time zone you
select is highlighted on the display and a letter ( P for
Pacific, M for Mountain, C for Central, or E for Eastern)
appears above the time zone.
2. Hold down MODE/SET until the hour digit flashes.
3. Repeatedly press or hold down +/AUTO ON to set the hour.
Note: AM appears for AM hours and PM appears for PM
hours.
4. Press MODE/SET . The minute digits flash.
5. Repeatedly press or hold down +/AUTO ON to set the
minute.
6. Press MODE/SET . The year digits flash.
63-968.fm Page 15 Friday, July 2, 1999 2:19 PM