Radio Shack 63-968 - Manual (Page 6)

6
Notes:
• If the clock does not operate after you install the batteries,
remove them and wait about 5 seconds until the display
clears. Then reinstall them.
• The clock displays the day of the week in English. To set
the clock so it displays in another language, see “Manually
Setting the Time, Date, and Language” on Page 15.
• The clock is set to automatically search for a radio signal to
set the time and date when you install the batteries. To set
the clock manually instead, see “Manually Setting the Time,
Date, and Language” on Page 15.
Immediately after you install the batteries, all of the clock’s dis-
play elements briefly appear, then
and : flash. Then the
clock scans for the radio signal and the map of the United
States flashes for about 2 minutes. While the clock scans for
the radio signal, you might see any of the following:
What You See What it Means
The clock received a radio signal strong
enough to set the date and time within the
last 96 hours.
The time and date were set manually.
63-968.fm Page 6 Friday, July 2, 1999 2:19 PM