Raritan Computer PCS12 - Manual (Page 18)

8 R EMOTE P OWER C ONTROL U SER G UIDE
PCS12 Operation
Viewing the Status Menu
The PCS12 unit is powered ON once it is plugged in. The Status menu appears on the monitor of the connected computer:
PCS12 Status Menu
Note: If the Status menu does not appear, ensure that the correct cables and adapters are being used and that
they are connected properly, and verify the serial communication parameters are correctly configured.
Controlling Outlets
To set or change the status of the outlets, enter one of the following commands, where “n” is the outlet number to command:
• ON n
• OFF n
• REBOOT n
Entering an outlet number of “0” sends the command to all outlets.
Important! Reboot works only on those outlets that are “On.”
Raritan PCS12
(C) 2003 Raritan Computer, Inc.
F1.01
Option(s) Installed:
True RMS Current
True RMS Voltage: 116 Volts
True RMS Current: 0.0 Amps
Maximum Detected: 0.0 Amps
1) . . . Outlet 1 : Off
2) . . . Outlet 2 : Off
3) . . . Outlet 3 : Off
4) . . . Outlet 4 : Off
5) . . . Outlet 5 : Off
6) . . . Outlet 6 : Off
7) . . . Outlet 7 : Off
8) . . . Outlet 8 : Off
9) . . . Outlet 9 : Off
10) . . . Outlet 10 : Off
11) . . . Outlet 11 : Off
12) . . . Outlet 12 : Off
Type “Help” for a list of commands
PCS12>