Raritan Computer PCS12 - Manual (Page 21)

C HAPTER 2: Q UICK S TART 11
PCS20 Operation
Viewing the Status Menu
The PCS20 unit is powered ON once it is plugged in. The Status menu appears on the monitor of the connected computer:
PCS20 Status Menu
Note: If the Status menu does not appear, ensure that the correct cables and adapters are being used and that
they are connected properly, and verify the serial communication parameters are correctly configured.
Controlling Outlets
To set or change the status of the outlets, enter one of the following commands, where “n” is the outlet number to command:
• ON n
• OFF n
• REBOOT n
Entering an outlet number of “0” sends the command to all outlets.
Important! Reboot works only on those outlets that are “On.”
Raritan PCS20
(C) 2003 Raritan Computer, Inc.
F1.01
Option(s) Installed:
True RMS Current
Internal Temperature
True RMS Voltage
Enter user name: Raritan
Unit ID: RPS20
Average Power: 0 Watts
Apparent Power: 177 VA
True RMS Voltage: 110.6 Volts
True RMS Current: 1.5 Amps
Maximum Detected: 8.4 Amps
Internal Temperature: 26.5 C
Outlet Circuit Breaker: Good
1)...Outlet 1 : Off 2)...Outlet 2 : Off
3)...Outlet 3 : Off 4)...Outlet 4 : Off
5)...Outlet 5 : Off 6)...Outlet 6 : Off
7)...Outlet 7 : Off 8)...Outlet 8 : Off
9)...Outlet 9 : Off 10)...Outlet 10 : Off
11)...Outlet 11 : Off
12)...Outlet 12 : Off
13)...Outlet 13 : Off 14)...Outlet 14 : Off
15)...Outlet 15 : Off 16)...Outlet 16 : Off
17)...Outlet 17 : Off 18)...Outlet 18 : Off
19)...Outlet 19 : Off 20)...Outlet 20 : Off
Type "Help" for a list of commands
PCS20>