Radio Shack 43-3905 - Manual (Page 3)

3
b
Battery Notes:
• During battery replacement, keep the line cord plugged in and
replace the batteries within two minutes to maintain Caller ID
memory.
• When the low battery icon appears or the display dims, replace the
batteries.
• Make sure the batteries fit tightly in the battery compartment.
• Dispose of old batteries promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required size and recommended
type.
• Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
• If you do not plan to use the phone for two weeks or longer,
remove the batteries. Batteries can leak chemicals that can destroy
electronic parts.
2 Install Your Phone
You can mount your phone on a wall plate, a wall, or place it on
a desk or table.
To mount the phone to a wall plate:
1. Plug one end of the
supplied short modular cord
into the LINE jack at the
back of the base.
2. Plug the other end of the
cord into the wall plate jack.
3. Align the base’s keyhole
slots with the wall plate
studs and slide the phone
downward to secure it.